Represents a model of a wedge (disk, ring, sector or curvilinear quadrilateral). More...

#include <eVision/Easy/Legacy/EWedge.h>

Inheritance diagram for eVision::Legacy::EWedge:

Collaboration diagram for eVision::Legacy::EWedge:

Public Member Functions
	EWedge ()
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, float diameter, float breadth, float originAngle, bool direct)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, float diameter, float breadth, float originAngle)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, float diameter, float breadth)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, float diameter)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth, bool direct)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, const eVision::EPoint &origin)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &center, float diameter, float breadth, float originAngle, float amplitude)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end, float breadth, bool fullCircle)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end, float breadth)
	Constructs a EWedge object.
	EWedge (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end)
	Constructs a EWedge object.
	EWedge (const eVision::Legacy::EWedge &other)
	Constructs a EWedge object.
virtual	~EWedge () throw ()
eVision::Legacy::EWedge &	operator= (const eVision::Legacy::EWedge &other)
	Copies all the data from another EWedge object into the current EWedge object.
void	CopyTo (eVision::Legacy::EWedge &other) const
	Copies all the data of the current EWedge object into another EWedge object and returns it.
eVision::Legacy::EWedge *	CopyTo (eVision::Legacy::EWedge *destinationImage) const
	Copies all the data of the current EWedge object into another EWedge object and returns it.
void	SetFromCenterAndOrigin (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth, bool direct)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromCenterAndOrigin (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromCenterAndOrigin (const eVision::EPoint &center, const eVision::EPoint &origin)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromOriginMiddleEnd (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end, float breadth, bool fullCircle)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromOriginMiddleEnd (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromOriginMiddleEnd (const eVision::EPoint &origin, const eVision::EPoint &middle, const eVision::EPoint &end)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromTwoPoints (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth, bool direct)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromTwoPoints (const eVision::EPoint &center, const eVision::EPoint &origin, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetFromTwoPoints (const eVision::EPoint &center, const eVision::EPoint &origin)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.
void	SetAmplitude (float ampl)
	Angular amplitude of the EWedge.
float	GetAmplitude () const
	Angular amplitude of the EWedge.
void	SetRadii (float radius, float breadth)
	Sets the nominal radius and breadth of the EWedge.
void	SetRadii (float radius)
	Sets the nominal radius and breadth of the EWedge.
void	SetDiameters (float diameter, float breadth)
	Sets the nominal inner/outer diameter and breadth of the EWedge.
void	SetDiameters (float diameter)
	Sets the nominal inner/outer diameter and breadth of the EWedge.
float	GetInnerDiameter () const
	Inner diameter of the EWedge.
float	GetOuterDiameter () const
	Outer diameter of the EWedge.
float	GetInnerRadius () const
	Inner radius of the EWedge.
float	GetOuterRadius () const
	Outer radius of the EWedge.
float	GetBreadth () const
	Breadth of the EWedge.
float	GetInnerArcLength () const
	Inner circle arc length of the EWedge.
float	GetOuterArcLength () const
	Outer circle arc length of the EWedge.
float	GetOrgAngle () const
	Angular position from where the EWedge extents.
float	GetApexAngle () const
	Angular position at the apex of the EWedge.
float	GetEndAngle () const
	Ending angular position of the EWedge.
eVision::EPoint	GetInnerOrg () const
	Inner origin point coordinates of the EWedge.
eVision::EPoint	GetInnerApex () const
	Inner apex point coordinates of the EWedge.
eVision::EPoint	GetInnerEnd () const
	Inner end point coordinates of the EWedge.
eVision::EPoint	GetOuterOrg () const
	Outer origin point coordinates of the EWedge.
eVision::EPoint	GetOuterApex () const
	Outer apex point coordinates of the EWedge.
eVision::EPoint	GetOuterEnd () const
	Outer end point coordinates of the EWedge.
eVision::EPoint	GetInnerPoint (float fraction) const
	Returns the coordinates of a particular point specified by its location along the inner circle arc.
eVision::EPoint	GetOuterPoint (float fraction) const
	Returns the coordinates of a particular point specified by its location along the outter circle arc.
eVision::EPoint	GetPoint (float breadthFraction, float angleFraction) const
	Returns the coordinates of a particular point specified by its location along the wedge perimeter.
bool	GetFullBreadth () const
	Flag indicating if the EWedge has a full breadth (breadth = radius).
bool	GetFullCircle () const
	Flag indicating if the EWedge is a full circle (amplitude = 2 PI).
bool	GetDirect () const
	Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.
void	SetDirect (bool direct)
void	GetMidEdges (eVision::EPoint &a, eVision::EPoint &AA, eVision::EPoint &r, eVision::EPoint &RR)
	Retrieves the center coordinates of each edge of the wedge fitting gauge.
void	GetCorners (eVision::EPoint &ar, eVision::EPoint &AAr, eVision::EPoint &aRR, eVision::EPoint &AARR)
	Retrieves the coordinates of each corner of the EWedge.
void	GetEdges (eVision::Legacy::ELine &a, eVision::Legacy::ELine &AA, eVision::Legacy::ECircle &r, eVision::Legacy::ECircle &RR)
	Retrieves each edge of the EWedge.
	EWedge (CppWrapperInternal::InternalConstructor)
Public Member Functions inherited from eVision::Legacy::EFrame
	EFrame ()
	Constructs a EFrame object.
	EFrame (float centerX, float centerY, float angle, float scale)
	Constructs a EFrame object.
	EFrame (float centerX, float centerY, float angle)
	Constructs a EFrame object.
	EFrame (float centerX, float centerY)
	Constructs a EFrame object.
	EFrame (const eVision::EPoint &center, float angle, float scale)
	Constructs a EFrame object.
	EFrame (const eVision::Legacy::EFrame &frame)
	Constructs a EFrame object.
virtual	~EFrame () throw ()
eVision::Legacy::EFrame &	operator= (const eVision::Legacy::EFrame &frame)
	Copies all the data from another EFrame object into the current EFrame object.
eVision::EPoint	operator+ (const eVision::EPoint &point) const
	Returns the addition of the point to the center of the EFrame.
eVision::EPoint	operator- (const eVision::EPoint &point) const
	Returns the substraction of the center of the EFrame with the given point.
eVision::EPoint	operator* (float scalar) const
	Returns the multiplication of the center of the EFrame with the given multiplier.
eVision::EPoint	operator/ (float scalar) const
	Returns the division of the center of the EFrame with the given divisor.
bool	operator== (const eVision::Legacy::EFrame &frame) const
	Compares the current EFrame center coordinates with the center coordinates of another EFrame object.
bool	operator!= (const eVision::Legacy::EFrame &frame) const
	Compares the current EFrame center coordinates with the center coordinates of another EFrame object.
void	CopyTo (eVision::Legacy::EFrame &other) const
	Copies all the data from the current EFrame object into another EFrame object, and returns it.
eVision::Legacy::EFrame *	CopyTo (eVision::Legacy::EFrame *other) const
	Copies all the data from the current EFrame object into another EFrame object, and returns it.
void	SetAngle (float angle)
	Orientation of the frame.
void	SetScale (float scale)
	Horizontal sensor resolution, in pixels per unit.
float	GetCenterX () const
	Abscissa of the origin point of the frame.
float	GetCenterY () const
	Ordinate of the origin point of the frame.
float	GetAngle () const
	Orientation of the frame.
float	GetScale () const
	Horizontal sensor resolution, in pixels per unit.
eVision::EPoint	LocalToGlobal (const eVision::EPoint &local) const
	Transforms a geometrical element from local to global coordinates (local to world).
eVision::Legacy::EFrame	LocalToGlobal (const eVision::Legacy::EFrame &local) const
	Transforms a geometrical element from local to global coordinates (local to world).
eVision::Legacy::ELine	LocalToGlobal (const eVision::Legacy::ELine &local) const
	Transforms a geometrical element from local to global coordinates (local to world).
eVision::Legacy::ECircle	LocalToGlobal (const eVision::Legacy::ECircle &local) const
	Transforms a geometrical element from local to global coordinates (local to world).
eVision::EPoint	GlobalToLocal (const eVision::EPoint &global) const
	Transforms a geometrical element from global to local coordinates (world to local).
eVision::Legacy::EFrame	GlobalToLocal (const eVision::Legacy::EFrame &global) const
	Transforms a geometrical element from global to local coordinates (world to local).
void	Load (const std::string &path)
	Load the EFrame configuration. The given ESerializer must have been created for reading.
void	Load (eVision::ESerializer *serializer)
	Load the EFrame configuration. The given ESerializer must have been created for reading.
void	Save (const std::string &path)
	Save the EFrame configuration. The given ESerializer must have been created for writing.
void	Save (eVision::ESerializer *serializer)
	Save the EFrame configuration. The given ESerializer must have been created for writing.
virtual void	SetCenter (const eVision::EPoint &center)
	Center coordinates of a EFrame object.
virtual eVision::EPoint	GetCenter () const
	Center.
void	SetCenterXY (float centerX, float centerY)
	Sets the center coordinates of a EFrame object.
float	GetX () const
	Abscissa (X coordinate) of the EFrame object.
void	SetX (float value)
	Abscissa (X coordinate) of the EFrame object.
float	GetY () const
	Ordinate (Y coordinate) of the EFrame object.
void	SetY (float value)
	Ordinate (Y coordinate) of the EFrame object.
eVision::EPoint	MidPoint (const eVision::EPoint &Point) const
	Returns the middle coordinate between this EFrame object's center and another EFrame object's center.
eVision::EPoint	Rotate (float angle) const
	Returns another EPoint object containing the coordinates of the rotated center point.
float	Square () const
	Compute the sum of the squared coordinates of the center of a EFrame.
float	Modulus () const
	Compute the euclidean modulus of the center of a EFrame.
float	Argument () const
	Compute the polar argument of the center of EFrame object.
float	Dot (const eVision::EPoint &Point) const
	Compute the dot product of the centers of two EFrame objects.
float	Cross (const eVision::EPoint &Point) const
	Compute the cross product of the centers of two EFrame objects.
float	Area (const eVision::EPoint &Point) const
	Compute the oriented area of the parallelogram built on the centers of two EFrame.
eVision::EPoint	Project (const eVision::Legacy::ELine &shape) const
	Compute the orthogonal projection of the center of a EFrame on another shape.
eVision::EPoint	Project (const eVision::Legacy::ECircle &shape) const
	Compute the orthogonal projection of the center of a EFrame on another shape.
float	SquaredDistance (const eVision::EPoint &Point) const
	Compute the squared distance between the centers of two EFrame.
eVision::EPoint	Move (float angle, float distance) const
	Return the position by moving the center along angle by distance.
virtual float	Distance (const eVision::EPoint &point) const
	Returns the distance between the addressed point and the center of EFrame object.
virtual float	Distance (const eVision::Legacy::ELine &line, bool segmentOnly) const
	Returns the distance between the addressed point and the center of EFrame object.
virtual float	Distance (const eVision::Legacy::ELine &line) const
	Returns the distance between the addressed point and the center of EFrame object.
virtual float	Distance (const eVision::Legacy::ECircle &circle, bool arcOnly) const
	Returns the distance between the addressed point and the center of EFrame object.
virtual float	Distance (const eVision::Legacy::ECircle &circle) const
	Returns the distance between the addressed point and the center of EFrame object.
	EFrame (CppWrapperInternal::InternalConstructor)

Additional Inherited Members
Public Attributes inherited from eVision::Legacy::EFrame
CppWrapperInternal::WrappedClass	wrappedClass_

Detailed Description

Represents a model of a wedge (disk, ring, sector or curvilinear quadrilateral).

License(s): BasicTypes

Constructor & Destructor Documentation

◆ EWedge() [1/14]

eVision::Legacy::EWedge::EWedge ( )

Constructs a EWedge object.

◆ EWedge() [2/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		float	diameter,
		float	breadth,
		float	originAngle,
		bool	direct )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
originAngle	Origin point coordinates of the wedge.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ EWedge() [3/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		float	diameter,
		float	breadth,
		float	originAngle )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
originAngle	Origin point coordinates of the wedge.

◆ EWedge() [4/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		float	diameter,
		float	breadth )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

◆ EWedge() [5/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		float	diameter )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.

◆ EWedge() [6/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth,
		bool	direct )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ EWedge() [7/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

◆ EWedge() [8/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

◆ EWedge() [9/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	center,
		float	diameter,
		float	breadth,
		float	originAngle,
		float	amplitude )

Constructs a EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
originAngle	Origin point coordinates of the wedge.
amplitude	Nominal angular amplitude of the wedge. The default value is 360.

◆ EWedge() [10/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end,
		float	breadth,
		bool	fullCircle )

Constructs a EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
fullCircle	true (default) in case of a full turn wedge. If fullCircle is false, origin and end give the wedge's amplitude.

◆ EWedge() [11/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end,
		float	breadth )

Constructs a EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

◆ EWedge() [12/14]

eVision::Legacy::EWedge::EWedge	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end )

Constructs a EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.

◆ EWedge() [13/14]

eVision::Legacy::EWedge::EWedge ( const eVision::Legacy::EWedge & other )

Constructs a EWedge object.

Parameters

other Another EWedge object to be copied in the new EWedge object.

◆ ~EWedge()

eVision::Legacy::EWedge::~EWedge	(		)
throw	(	)

virtual

◆ EWedge() [14/14]

eVision::Legacy::EWedge::EWedge ( CppWrapperInternal::InternalConstructor )

Member Function Documentation

◆ CopyTo() [1/2]

void eVision::Legacy::EWedge::CopyTo ( eVision::Legacy::EWedge & other ) const

Copies all the data of the current EWedge object into another EWedge object and returns it.

Parameters

other EWedge object in which the current EWedge object data have to be copied.

In the overload taking a pointer, in case of a NULL pointer, a new EWedge object will be created and returned.

◆ CopyTo() [2/2]

eVision::Legacy::EWedge * eVision::Legacy::EWedge::CopyTo ( eVision::Legacy::EWedge * destinationImage ) const

Copies all the data of the current EWedge object into another EWedge object and returns it.

Parameters

destinationImage Pointer to the EWedge object in which the current EWedge object data have to be copied.

In the overload taking a pointer, in case of a NULL pointer, a new EWedge object will be created and returned.

Deprecated

Use the overload taking a reference.

Deprecated in version 25.10. Scheduled to be removed in version 27.6.

◆ GetAmplitude()

float eVision::Legacy::EWedge::GetAmplitude ( ) const

Angular amplitude of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ GetApexAngle()

float eVision::Legacy::EWedge::GetApexAngle ( ) const

Angular position at the apex of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ GetBreadth()

float eVision::Legacy::EWedge::GetBreadth ( ) const

Breadth of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetCorners()

void eVision::Legacy::EWedge::GetCorners	(	eVision::EPoint &	ar,
		eVision::EPoint &	AAr,
		eVision::EPoint &	aRR,
		eVision::EPoint &	AARR )

Retrieves the coordinates of each corner of the EWedge.

Parameters

ar	Coordinates of the inner org corner of the EWedge.
AAr	Coordinates of the inner end corner of the EWedge.
aRR	Coordinates of the outer org corner of the EWedge.
AARR	Coordinates of the outer end corner of the EWedge.

◆ GetDirect()

bool eVision::Legacy::EWedge::GetDirect ( ) const

Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.

true (default) means that angles increase anticlockwisely in a direct coordinate system, and clockwisely in an inverse coordinate system.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards.
When the field of view is not calibrated, the coordinate system is said to be inverse the abscissa extends rightwards and the ordinate extends downwards.

◆ GetEdges()

void eVision::Legacy::EWedge::GetEdges	(	eVision::Legacy::ELine &	a,
		eVision::Legacy::ELine &	AA,
		eVision::Legacy::ECircle &	r,
		eVision::Legacy::ECircle &	RR )

Retrieves each edge of the EWedge.

Parameters

a	Org edge of the EWedge.
AA	End edge of the EWedge.
r	Inner edge of the EWedge.
RR	Outer edge of the EWedge.

◆ GetEndAngle()

float eVision::Legacy::EWedge::GetEndAngle ( ) const

Ending angular position of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ GetFullBreadth()

bool eVision::Legacy::EWedge::GetFullBreadth ( ) const

Flag indicating if the EWedge has a full breadth (breadth = radius).

◆ GetFullCircle()

bool eVision::Legacy::EWedge::GetFullCircle ( ) const

Flag indicating if the EWedge is a full circle (amplitude = 2 PI).

◆ GetInnerApex()

eVision::EPoint eVision::Legacy::EWedge::GetInnerApex ( ) const

Inner apex point coordinates of the EWedge.

◆ GetInnerArcLength()

float eVision::Legacy::EWedge::GetInnerArcLength ( ) const

Inner circle arc length of the EWedge.

◆ GetInnerDiameter()

float eVision::Legacy::EWedge::GetInnerDiameter ( ) const

Inner diameter of the EWedge.

◆ GetInnerEnd()

eVision::EPoint eVision::Legacy::EWedge::GetInnerEnd ( ) const

Inner end point coordinates of the EWedge.

◆ GetInnerOrg()

eVision::EPoint eVision::Legacy::EWedge::GetInnerOrg ( ) const

Inner origin point coordinates of the EWedge.

◆ GetInnerPoint()

eVision::EPoint eVision::Legacy::EWedge::GetInnerPoint ( float fraction ) const

Returns the coordinates of a particular point specified by its location along the inner circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetInnerRadius()

float eVision::Legacy::EWedge::GetInnerRadius ( ) const

Inner radius of the EWedge.

◆ GetMidEdges()

void eVision::Legacy::EWedge::GetMidEdges	(	eVision::EPoint &	a,
		eVision::EPoint &	AA,
		eVision::EPoint &	r,
		eVision::EPoint &	RR )

Retrieves the center coordinates of each edge of the wedge fitting gauge.

Parameters

a	Center coordinates of the org edge of the EWedge.
AA	Center coordinates of the end edge of the EWedge.
r	Center coordinates of the inner edge of the EWedge.
RR	Center coordinates of the outer edge of the EWedge.

◆ GetOrgAngle()

float eVision::Legacy::EWedge::GetOrgAngle ( ) const

Angular position from where the EWedge extents.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ GetOuterApex()

eVision::EPoint eVision::Legacy::EWedge::GetOuterApex ( ) const

Outer apex point coordinates of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetOuterArcLength()

float eVision::Legacy::EWedge::GetOuterArcLength ( ) const

Outer circle arc length of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetOuterDiameter()

float eVision::Legacy::EWedge::GetOuterDiameter ( ) const

Outer diameter of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetOuterEnd()

eVision::EPoint eVision::Legacy::EWedge::GetOuterEnd ( ) const

Outer end point coordinates of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetOuterOrg()

eVision::EPoint eVision::Legacy::EWedge::GetOuterOrg ( ) const

Outer origin point coordinates of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal outer radius (diameter), its breadth (must be negative), the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetOuterPoint()

eVision::EPoint eVision::Legacy::EWedge::GetOuterPoint ( float fraction ) const

Returns the coordinates of a particular point specified by its location along the outter circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetOuterRadius()

float eVision::Legacy::EWedge::GetOuterRadius ( ) const

Outer radius of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ GetPoint()

eVision::EPoint eVision::Legacy::EWedge::GetPoint	(	float	breadthFraction,
		float	angleFraction ) const

Returns the coordinates of a particular point specified by its location along the wedge perimeter.

Parameters

breadthFraction	Point location expressed as a fraction of the wedge breadth (range -1, +1).
angleFraction	Point location expressed as a fraction of the wedge amplitude (range -1, +1).

◆ operator=()

eVision::Legacy::EWedge & eVision::Legacy::EWedge::operator= ( const eVision::Legacy::EWedge & other )

Copies all the data from another EWedge object into the current EWedge object.

Parameters

other EWedge object to be copied

◆ SetAmplitude()

void eVision::Legacy::EWedge::SetAmplitude ( float ampl )

Angular amplitude of the EWedge.

A EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ SetDiameters() [1/2]

void eVision::Legacy::EWedge::SetDiameters ( float diameter )

Sets the nominal inner/outer diameter and breadth of the EWedge.

Parameters

diameter Outer diameter of the EWedge. The default value is 100.

A EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the EWedge diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

◆ SetDiameters() [2/2]

void eVision::Legacy::EWedge::SetDiameters	(	float	diameter,
		float	breadth )

Sets the nominal inner/outer diameter and breadth of the EWedge.

Parameters

diameter	Outer diameter of the EWedge. The default value is 100.
breadth	Breadth of the EWedge. It must be negative or zero. Its default value is -50.

A EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the EWedge diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

◆ SetDirect()

void eVision::Legacy::EWedge::SetDirect ( bool direct )

◆ SetFromCenterAndOrigin() [1/3]

void eVision::Legacy::EWedge::SetFromCenterAndOrigin	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromCenterAndOrigin() [2/3]

void eVision::Legacy::EWedge::SetFromCenterAndOrigin	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromCenterAndOrigin() [3/3]

void eVision::Legacy::EWedge::SetFromCenterAndOrigin	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth,
		bool	direct )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromOriginMiddleEnd() [1/3]

void eVision::Legacy::EWedge::SetFromOriginMiddleEnd	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromOriginMiddleEnd() [2/3]

void eVision::Legacy::EWedge::SetFromOriginMiddleEnd	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromOriginMiddleEnd() [3/3]

void eVision::Legacy::EWedge::SetFromOriginMiddleEnd	(	const eVision::EPoint &	origin,
		const eVision::EPoint &	middle,
		const eVision::EPoint &	end,
		float	breadth,
		bool	fullCircle )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
fullCircle	true (default) in case of a full turn wedge. If fullCircle is false, origin and end give the wedge's amplitude.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

◆ SetFromTwoPoints() [1/3]

void eVision::Legacy::EWedge::SetFromTwoPoints	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use EWedge::SetFromCenterAndOrigin instead.

Deprecated in version 25.10. Scheduled to be removed in version 27.6.

◆ SetFromTwoPoints() [2/3]

void eVision::Legacy::EWedge::SetFromTwoPoints	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use EWedge::SetFromCenterAndOrigin instead.

Deprecated in version 25.10. Scheduled to be removed in version 27.6.

◆ SetFromTwoPoints() [3/3]

void eVision::Legacy::EWedge::SetFromTwoPoints	(	const eVision::EPoint &	center,
		const eVision::EPoint &	origin,
		float	breadth,
		bool	direct )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use EWedge::SetFromCenterAndOrigin instead.

Deprecated in version 25.10. Scheduled to be removed in version 27.6.

◆ SetRadii() [1/2]

void eVision::Legacy::EWedge::SetRadii ( float radius )

Sets the nominal radius and breadth of the EWedge.

Parameters

radius Outer radius of the EWedge. The default value is 50.

A EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the EWedge radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

◆ SetRadii() [2/2]

void eVision::Legacy::EWedge::SetRadii	(	float	radius,
		float	breadth )

Sets the nominal radius and breadth of the EWedge.

Parameters

radius	Outer radius of the EWedge. The default value is 50.
breadth	Breadth of the EWedge, which must be negative or zero. Its default value is -50.

A EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the EWedge radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ EWedge() [1/14]

◆ EWedge() [2/14]

◆ EWedge() [3/14]

◆ EWedge() [4/14]

◆ EWedge() [5/14]

◆ EWedge() [6/14]

◆ EWedge() [7/14]

◆ EWedge() [8/14]

◆ EWedge() [9/14]

◆ EWedge() [10/14]

◆ EWedge() [11/14]

◆ EWedge() [12/14]

◆ EWedge() [13/14]

◆ ~EWedge()

◆ EWedge() [14/14]

Member Function Documentation

◆ CopyTo() [1/2]

◆ CopyTo() [2/2]

◆ GetAmplitude()

◆ GetApexAngle()

◆ GetBreadth()

◆ GetCorners()

◆ GetDirect()

◆ GetEdges()

◆ GetEndAngle()

◆ GetFullBreadth()

◆ GetFullCircle()

◆ GetInnerApex()

◆ GetInnerArcLength()

◆ GetInnerDiameter()

◆ GetInnerEnd()

◆ GetInnerOrg()

◆ GetInnerPoint()

◆ GetInnerRadius()

◆ GetMidEdges()

◆ GetOrgAngle()

◆ GetOuterApex()

◆ GetOuterArcLength()

◆ GetOuterDiameter()

◆ GetOuterEnd()

◆ GetOuterOrg()

◆ GetOuterPoint()

◆ GetOuterRadius()

◆ GetPoint()

◆ operator=()

◆ SetAmplitude()

◆ SetDiameters() [1/2]

◆ SetDiameters() [2/2]

◆ SetDirect()

◆ SetFromCenterAndOrigin() [1/3]

◆ SetFromCenterAndOrigin() [2/3]

◆ SetFromCenterAndOrigin() [3/3]

◆ SetFromOriginMiddleEnd() [1/3]

◆ SetFromOriginMiddleEnd() [2/3]

◆ SetFromOriginMiddleEnd() [3/3]

◆ SetFromTwoPoints() [1/3]

◆ SetFromTwoPoints() [2/3]

◆ SetFromTwoPoints() [3/3]

◆ SetRadii() [1/2]

◆ SetRadii() [2/2]