Represents a model of a wedge (disk, ring, sector or curvilinear quadrilateral). More...

Inheritance diagram for eVision.EWedge:

Collaboration diagram for eVision.EWedge:

Public Member Functions
None	__init__ (self)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, float diameter, float breadth, float originAngle, bool direct)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, float diameter, float breadth, float originAngle)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, float diameter, float breadth)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, float diameter)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, eVision.EPoint origin, float breadth, bool direct)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, eVision.EPoint origin, float breadth)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, eVision.EPoint origin)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint center, float diameter, float breadth, float originAngle, float amplitude)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth, bool fullCircle)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end)
	Constructs a eVision.EWedge object.
None	__init__ (self, eVision.EWedge other)
	Constructs a eVision.EWedge object.
None	CopyTo (self, eVision.EWedge other)
	Copies all the data of the current eVision.EWedge object into another eVision.EWedge object and returns it.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin, float breadth, bool direct)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth, bool fullCircle)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.
None	SetRadii (self, float radius, float breadth)
	Sets the nominal radius and breadth of the eVision.EWedge.
None	SetRadii (self, float radius)
	Sets the nominal radius and breadth of the eVision.EWedge.
None	SetDiameters (self, float diameter, float breadth)
	Sets the nominal inner/outer diameter and breadth of the eVision.EWedge.
None	SetDiameters (self, float diameter)
	Sets the nominal inner/outer diameter and breadth of the eVision.EWedge.
eVision.EPoint	GetInnerPoint (self, float fraction)
	Returns the coordinates of a particular point specified by its location along the inner circle arc.
eVision.EPoint	GetOuterPoint (self, float fraction)
	Returns the coordinates of a particular point specified by its location along the outter circle arc.
eVision.EPoint	GetPoint (self, float breadthFraction, float angleFraction)
	Returns the coordinates of a particular point specified by its location along the wedge perimeter.
bool	IsFullBreadth (self)
	Flag indicating if the eVision.EWedge has a full breadth (breadth = radius).
bool	IsFullCircle (self)
	Flag indicating if the eVision.EWedge is a full circle (amplitude = 2 PI).
bool	IsDirect (self)
	Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.
None	GetMidEdges (self, eVision.EPoint a, eVision.EPoint AA, eVision.EPoint r, eVision.EPoint RR)
	Retrieves the center coordinates of each edge of the wedge fitting gauge.
None	GetCorners (self, eVision.EPoint ar, eVision.EPoint AAr, eVision.EPoint aRR, eVision.EPoint AARR)
	Retrieves the coordinates of each corner of the eVision.EWedge.
None	GetEdges (self, eVision.ELine orgEdge, eVision.ELine endEdge, eVision.ECircle innerCircle, eVision.ECircle outerCircle)
	Retrieves each edge of the eVision.EWedge.
eVision.EPoint	Center (self)
	Center of the eVision.EWedge.
	Center (self, eVision.EPoint value)
	Center of the eVision.EWedge.
float	CenterX (self)
	X coordinate of the center of the eVision.EWedge.
	CenterX (self, float value)
	X coordinate of the center of the eVision.EWedge.
float	CenterY (self)
	Y coordinate of the center of the eVision.EWedge.
	CenterY (self, float value)
	Y coordinate of the center of the eVision.EWedge.
float	Angle (self)
	Starting orientation of the eVision.EWedge.
	Angle (self, float value)
	Starting orientation of the eVision.EWedge.
float	Amplitude (self)
	Angular amplitude of the eVision.EWedge.
	Amplitude (self, float value)
	Angular amplitude of the eVision.EWedge.
float	InnerDiameter (self)
	Inner diameter of the eVision.EWedge.
float	OuterDiameter (self)
	Outer diameter of the eVision.EWedge.
float	InnerRadius (self)
	Inner radius of the eVision.EWedge.
float	OuterRadius (self)
	Outer radius of the eVision.EWedge.
float	Breadth (self)
	Breadth of the eVision.EWedge.
float	InnerArcLength (self)
	Inner circle arc length of the eVision.EWedge.
float	OuterArcLength (self)
	Outer circle arc length of the eVision.EWedge.
float	OrgAngle (self)
	Angular position from where the eVision.EWedge extents.
float	ApexAngle (self)
	Angular position at the apex of the eVision.EWedge.
float	EndAngle (self)
	Ending angular position of the eVision.EWedge.
eVision.EPoint	InnerOrg (self)
	Inner origin point coordinates of the eVision.EWedge.
eVision.EPoint	InnerApex (self)
	Inner apex point coordinates of the eVision.EWedge.
eVision.EPoint	InnerEnd (self)
	Inner end point coordinates of the eVision.EWedge.
eVision.EPoint	OuterOrg (self)
	Outer origin point coordinates of the eVision.EWedge.
eVision.EPoint	OuterApex (self)
	Outer apex point coordinates of the eVision.EWedge.
eVision.EPoint	OuterEnd (self)
	Outer end point coordinates of the eVision.EWedge.
eVision.EEditionMode	AvailableEditionModes (self)
	Available edition modes for the shape.
str	Description (self)
	Textual description of the shape and its parameters.
Public Member Functions inherited from eVision.EShape
None	Load (self, str path)
	Load the eVision.EShape configuration.
None	Load (self, eVision.ESerializer\|None serializer)
	Load the eVision.EShape configuration.
None	Save (self, str path)
	Save the eVision.EShape configuration.
None	Save (self, eVision.ESerializer\|None serializer)
	Save the eVision.EShape configuration.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, float zoomX, float zoomY, float panX, float panY, bool drawDiagonals)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, float zoomX, float zoomY, float panX, float panY)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, float zoomX, float zoomY, float panX)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, float zoomX, float zoomY)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, float zoomX)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame, float zoomX, float zoomY, float panX, float panY, bool drawDiagonals)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame, float zoomX, float zoomY, float panX, float panY)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame, float zoomX, float zoomY, float panX)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame, float zoomX, float zoomY)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame, float zoomX)
	Draws the eVision.EShape shape.
None	Draw (self, eVision.EDrawAdapter\|None drawAdapter, eVision.EFrame frame)
	Draws the eVision.EShape shape.
eVision.EEditionMode	HitTest (self, int x, int y, float zoomX, float zoomY, float panX, float panY)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, float zoomX, float zoomY, float panX)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, float zoomX, float zoomY)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, float zoomX)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY, float panX, float panY)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY, float panX)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY)
	Detects if the cursor is placed over one of the dragging handles.
eVision.EEditionMode	HitTest (self, int x, int y, eVision.EFrame frame, float zoomX)
	Detects if the cursor is placed over one of the dragging handles.
None	Drag (self, int x, int y, float zoomX, float zoomY, float panX, float panY)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, float zoomX, float zoomY, float panX)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, float zoomX, float zoomY)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, float zoomX)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY, float panX, float panY)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY, float panX)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, eVision.EFrame frame, float zoomX, float zoomY)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, eVision.EFrame frame, float zoomX)
	Moves the specified handle to a new position and updates all placement parameters of the region.
None	Drag (self, int x, int y, eVision.EFrame frame)
	Moves the specified handle to a new position and updates all placement parameters of the region.
eVision.EFrame	ToFrame (self, bool useAngle, eVision.EFrameScaling frameScaling)
	Converts the shape to a frame.
eVision.EFrame	ToFrame (self, bool useAngle, eVision.EFrameScaling frameScaling, eVision.EFrame shapeFrame)
	Converts the shape to a frame.
eVision.EEditionMode	EditionMode (self)
	Current edition mode for the shape.
	EditionMode (self, eVision.EEditionMode value)
	Current edition mode for the shape.

Detailed Description

Represents a model of a wedge (disk, ring, sector or curvilinear quadrilateral).

Remarks:

License(s): BasicTypes

Constructor & Destructor Documentation

◆ init() [1/13]

None eVision.EWedge.__init__ ( self )

Constructs a eVision.EWedge object.

◆ init() [2/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		float	diameter,
		float	breadth,
		float	originAngle,
		bool	direct )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
originAngle	Origin point coordinates of the wedge.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ init() [3/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		float	diameter,
		float	breadth,
		float	originAngle )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
originAngle	Origin point coordinates of the wedge.

◆ init() [4/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		float	diameter,
		float	breadth )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.

◆ init() [5/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		float	diameter )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.

◆ init() [6/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth,
		bool	direct )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ init() [7/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.

◆ init() [8/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

◆ init() [9/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	center,
		float	diameter,
		float	breadth,
		float	originAngle,
		float	amplitude )

Constructs a eVision.EWedge object.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
diameter	Nominal diameter of the wedge. The default value is 100.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
originAngle	Origin point coordinates of the wedge.
amplitude	Nominal angular amplitude of the wedge. The default value is 360.

◆ init() [10/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth,
		bool	fullCircle )

Constructs a eVision.EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
fullCircle	true (default) in case of a full turn wedge. If fullCircle is false, origin and end give the wedge's amplitude.

◆ init() [11/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth )

Constructs a eVision.EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.

◆ init() [12/13]

None eVision.EWedge.__init__	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end )

Constructs a eVision.EWedge object.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.

◆ init() [13/13]

None eVision.EWedge.__init__	(		self,
		eVision.EWedge	other )

Constructs a eVision.EWedge object.

Parameters

other Another eVision.EWedge object to be copied in the new eVision.EWedge object.

Member Function Documentation

◆ Amplitude() [1/2]

float eVision.EWedge.Amplitude ( self )

Angular amplitude of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ Amplitude() [2/2]

eVision.EWedge.Amplitude	(		self,
		float	value )

Angular amplitude of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ Angle() [1/2]

float eVision.EWedge.Angle ( self )

Starting orientation of the eVision.EWedge.

◆ Angle() [2/2]

eVision.EWedge.Angle	(		self,
		float	value )

Starting orientation of the eVision.EWedge.

◆ ApexAngle()

float eVision.EWedge.ApexAngle ( self )

Angular position at the apex of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ AvailableEditionModes()

eVision.EEditionMode eVision.EWedge.AvailableEditionModes ( self )

Available edition modes for the shape.

Reimplemented from eVision.EShape.

◆ Breadth()

float eVision.EWedge.Breadth ( self )

Breadth of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ Center() [1/2]

eVision.EPoint eVision.EWedge.Center ( self )

Center of the eVision.EWedge.

◆ Center() [2/2]

eVision.EWedge.Center	(		self,
		eVision.EPoint	value )

Center of the eVision.EWedge.

◆ CenterX() [1/2]

float eVision.EWedge.CenterX ( self )

X coordinate of the center of the eVision.EWedge.

◆ CenterX() [2/2]

eVision.EWedge.CenterX	(		self,
		float	value )

X coordinate of the center of the eVision.EWedge.

◆ CenterY() [1/2]

float eVision.EWedge.CenterY ( self )

Y coordinate of the center of the eVision.EWedge.

◆ CenterY() [2/2]

eVision.EWedge.CenterY	(		self,
		float	value )

Y coordinate of the center of the eVision.EWedge.

◆ CopyTo()

None eVision.EWedge.CopyTo	(		self,
		eVision.EWedge	other )

Copies all the data of the current eVision.EWedge object into another eVision.EWedge object and returns it.

Remarks:

In the overload taking a pointer, in case of a NULL pointer, a new eVision.EWedge object will be created and returned.

Parameters

other eVision.EWedge object in which the current eVision.EWedge object data have to be copied.

◆ Description()

str eVision.EWedge.Description ( self )

Textual description of the shape and its parameters.

Reimplemented from eVision.EShape.

◆ EndAngle()

float eVision.EWedge.EndAngle ( self )

Ending angular position of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ GetCorners()

None eVision.EWedge.GetCorners	(		self,
		eVision.EPoint	ar,
		eVision.EPoint	AAr,
		eVision.EPoint	aRR,
		eVision.EPoint	AARR )

Retrieves the coordinates of each corner of the eVision.EWedge.

Parameters

ar	Coordinates of the inner org corner of the eVision.EWedge.
AAr	Coordinates of the inner end corner of the eVision.EWedge.
aRR	Coordinates of the outer org corner of the eVision.EWedge.
AARR	Coordinates of the outer end corner of the eVision.EWedge.

◆ GetEdges()

None eVision.EWedge.GetEdges	(		self,
		eVision.ELine	orgEdge,
		eVision.ELine	endEdge,
		eVision.ECircle	innerCircle,
		eVision.ECircle	outerCircle )

Retrieves each edge of the eVision.EWedge.

Parameters

orgEdge	Org edge of the eVision.EWedge.
endEdge	End edge of the eVision.EWedge.
innerCircle	Inner edge of the eVision.EWedge.
outerCircle	Outer edge of the eVision.EWedge.

◆ GetInnerPoint()

eVision.EPoint eVision.EWedge.GetInnerPoint	(		self,
		float	fraction )

Returns the coordinates of a particular point specified by its location along the inner circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetMidEdges()

None eVision.EWedge.GetMidEdges	(		self,
		eVision.EPoint	a,
		eVision.EPoint	AA,
		eVision.EPoint	r,
		eVision.EPoint	RR )

Retrieves the center coordinates of each edge of the wedge fitting gauge.

Parameters

a	Center coordinates of the org edge of the eVision.EWedge.
AA	Center coordinates of the end edge of the eVision.EWedge.
r	Center coordinates of the inner edge of the eVision.EWedge.
RR	Center coordinates of the outer edge of the eVision.EWedge.

◆ GetOuterPoint()

eVision.EPoint eVision.EWedge.GetOuterPoint	(		self,
		float	fraction )

Returns the coordinates of a particular point specified by its location along the outter circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetPoint()

eVision.EPoint eVision.EWedge.GetPoint	(		self,
		float	breadthFraction,
		float	angleFraction )

Returns the coordinates of a particular point specified by its location along the wedge perimeter.

Parameters

breadthFraction	Point location expressed as a fraction of the wedge breadth (range -1, +1).
angleFraction	Point location expressed as a fraction of the wedge amplitude (range -1, +1).

◆ InnerApex()

eVision.EPoint eVision.EWedge.InnerApex ( self )

Inner apex point coordinates of the eVision.EWedge.

◆ InnerArcLength()

float eVision.EWedge.InnerArcLength ( self )

Inner circle arc length of the eVision.EWedge.

◆ InnerDiameter()

float eVision.EWedge.InnerDiameter ( self )

Inner diameter of the eVision.EWedge.

◆ InnerEnd()

eVision.EPoint eVision.EWedge.InnerEnd ( self )

Inner end point coordinates of the eVision.EWedge.

◆ InnerOrg()

eVision.EPoint eVision.EWedge.InnerOrg ( self )

Inner origin point coordinates of the eVision.EWedge.

◆ InnerRadius()

float eVision.EWedge.InnerRadius ( self )

Inner radius of the eVision.EWedge.

◆ IsDirect()

bool eVision.EWedge.IsDirect ( self )

Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.

Remarks:

true (default) means that angles increase anticlockwisely in a direct coordinate system, and clockwisely in an inverse coordinate system.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards.
When the field of view is not calibrated, the coordinate system is said to be inverse the abscissa extends rightwards and the ordinate extends downwards.

◆ IsFullBreadth()

bool eVision.EWedge.IsFullBreadth ( self )

Flag indicating if the eVision.EWedge has a full breadth (breadth = radius).

◆ IsFullCircle()

bool eVision.EWedge.IsFullCircle ( self )

Flag indicating if the eVision.EWedge is a full circle (amplitude = 2 PI).

◆ OrgAngle()

float eVision.EWedge.OrgAngle ( self )

Angular position from where the eVision.EWedge extents.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ OuterApex()

eVision.EPoint eVision.EWedge.OuterApex ( self )

Outer apex point coordinates of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterArcLength()

float eVision.EWedge.OuterArcLength ( self )

Outer circle arc length of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterDiameter()

float eVision.EWedge.OuterDiameter ( self )

Outer diameter of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterEnd()

eVision.EPoint eVision.EWedge.OuterEnd ( self )

Outer end point coordinates of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterOrg()

eVision.EPoint eVision.EWedge.OuterOrg ( self )

Outer origin point coordinates of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal outer radius (diameter), its breadth (must be negative), the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterRadius()

float eVision.EWedge.OuterRadius ( self )

Outer radius of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ SetDiameters() [1/2]

None eVision.EWedge.SetDiameters	(		self,
		float	diameter )

Sets the nominal inner/outer diameter and breadth of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.EWedge diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

Parameters

diameter Outer diameter of the eVision.EWedge. The default value is 100.

◆ SetDiameters() [2/2]

None eVision.EWedge.SetDiameters	(		self,
		float	diameter,
		float	breadth )

Sets the nominal inner/outer diameter and breadth of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.EWedge diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

Parameters

diameter	Outer diameter of the eVision.EWedge. The default value is 100.
breadth	Breadth of the eVision.EWedge. It must be negative or zero. Its default value is -50.

◆ SetFromCenterAndOrigin() [1/3]

None eVision.EWedge.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

◆ SetFromCenterAndOrigin() [2/3]

None eVision.EWedge.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.

◆ SetFromCenterAndOrigin() [3/3]

None eVision.EWedge.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth,
		bool	direct )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ SetFromOriginMiddleEnd() [1/3]

None eVision.EWedge.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.

◆ SetFromOriginMiddleEnd() [2/3]

None eVision.EWedge.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.

◆ SetFromOriginMiddleEnd() [3/3]

None eVision.EWedge.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth,
		bool	fullCircle )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.EWedge object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is 0.
fullCircle	true (default) in case of a full turn wedge. If fullCircle is false, origin and end give the wedge's amplitude.

◆ SetRadii() [1/2]

None eVision.EWedge.SetRadii	(		self,
		float	radius )

Sets the nominal radius and breadth of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.EWedge radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

Parameters

radius Outer radius of the eVision.EWedge. The default value is 50.

◆ SetRadii() [2/2]

None eVision.EWedge.SetRadii	(		self,
		float	radius,
		float	breadth )

Sets the nominal radius and breadth of the eVision.EWedge.

Remarks:

A eVision.EWedge is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.EWedge radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

Parameters

radius	Outer radius of the eVision.EWedge. The default value is 50.
breadth	Breadth of the eVision.EWedge, which must be negative or zero. Its default value is -50.

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ __init__() [1/13]

◆ __init__() [2/13]

◆ __init__() [3/13]

◆ __init__() [4/13]

◆ __init__() [5/13]

◆ __init__() [6/13]

◆ __init__() [7/13]

◆ __init__() [8/13]

◆ __init__() [9/13]

◆ __init__() [10/13]

◆ __init__() [11/13]

◆ __init__() [12/13]

◆ __init__() [13/13]

Member Function Documentation

◆ Amplitude() [1/2]

◆ Amplitude() [2/2]

◆ Angle() [1/2]

◆ Angle() [2/2]

◆ ApexAngle()

◆ AvailableEditionModes()

◆ Breadth()

◆ Center() [1/2]

◆ Center() [2/2]

◆ CenterX() [1/2]

◆ CenterX() [2/2]

◆ CenterY() [1/2]

◆ CenterY() [2/2]

◆ CopyTo()

◆ Description()

◆ EndAngle()

◆ GetCorners()

◆ GetEdges()

◆ GetInnerPoint()

◆ GetMidEdges()

◆ GetOuterPoint()

◆ GetPoint()

◆ InnerApex()

◆ InnerArcLength()

◆ InnerDiameter()

◆ InnerEnd()

◆ InnerOrg()

◆ InnerRadius()

◆ IsDirect()

◆ IsFullBreadth()

◆ IsFullCircle()

◆ OrgAngle()

◆ OuterApex()

◆ OuterArcLength()

◆ OuterDiameter()

◆ OuterEnd()

◆ OuterOrg()

◆ OuterRadius()

◆ SetDiameters() [1/2]

◆ SetDiameters() [2/2]

◆ SetFromCenterAndOrigin() [1/3]

◆ SetFromCenterAndOrigin() [2/3]

◆ SetFromCenterAndOrigin() [3/3]

◆ SetFromOriginMiddleEnd() [1/3]

◆ SetFromOriginMiddleEnd() [2/3]

◆ SetFromOriginMiddleEnd() [3/3]

◆ SetRadii() [1/2]

◆ SetRadii() [2/2]

◆ init() [1/13]

◆ init() [2/13]

◆ init() [3/13]

◆ init() [4/13]

◆ init() [5/13]

◆ init() [6/13]

◆ init() [7/13]

◆ init() [8/13]

◆ init() [9/13]

◆ init() [10/13]

◆ init() [11/13]

◆ init() [12/13]

◆ init() [13/13]