Manages a wedge shape. More...

Inheritance diagram for eVision.Legacy.EWedgeShape:

[legend]

Collaboration diagram for eVision.Legacy.EWedgeShape:

Public Member Functions
None	SetCenterXY (self, float centerX, float centerY)
	Sets the center coordinates of a eVision.Legacy.EWedgeShape object.
None	CopyTo (self, eVision.Legacy.EWedgeShape dest, bool bRecursive)
	Copies all the data of the current eVision.Legacy.EWedgeShape object into another eVision.Legacy.EWedgeShape object and returns it.
None	CopyTo (self, eVision.Legacy.EWedgeShape dest)
	Copies all the data of the current eVision.Legacy.EWedgeShape object into another eVision.Legacy.EWedgeShape object and returns it.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin, float breadth, bool direct)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromCenterAndOrigin (self, eVision.EPoint center, eVision.EPoint origin)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromTwoPoints (self, eVision.EPoint center, eVision.EPoint origin, float breadth, bool direct)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromTwoPoints (self, eVision.EPoint center, eVision.EPoint origin, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromTwoPoints (self, eVision.EPoint center, eVision.EPoint origin)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth, bool fullCircle)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end, float breadth)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetFromOriginMiddleEnd (self, eVision.EPoint origin, eVision.EPoint middle, eVision.EPoint end)
	Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.
None	SetRadii (self, float outerRadius, float breadth)
	Sets the nominal radius and breadth of the eVision.Legacy.EWedgeShape.
None	SetRadii (self, float outerRadius)
	Sets the nominal radius and breadth of the eVision.Legacy.EWedgeShape.
None	SetDiameters (self, float diameter, float breadth)
	Sets the nominal inner/outer diameter and breadth of the eVision.Legacy.EWedgeShape.
None	SetDiameters (self, float diameter)
	Sets the nominal inner/outer diameter and breadth of the eVision.Legacy.EWedgeShape.
eVision.EPoint	GetInnerPoint (self, float fraction)
	Returns the coordinates of a particular point specified by its location along the inner circle arc.
eVision.EPoint	GetOuterPoint (self, float fraction)
	Returns the coordinates of a particular point specified by its location along the outter circle arc.
eVision.EPoint	GetPoint (self, float breadthFraction, float angleFraction)
	Returns the coordinates of a particular point specified by its location along the wedge perimeter.
None	GetMidEdges (self, eVision.EPoint a, eVision.EPoint AA, eVision.EPoint r, eVision.EPoint RR)
	Retrieves the center coordinates of each edge of the wedge fitting gauge.
None	GetCorners (self, eVision.EPoint ar, eVision.EPoint AAr, eVision.EPoint aRR, eVision.EPoint AARR)
	Retrieves the coordinates of each corner of the eVision.Legacy.EWedgeShape.
None	GetEdges (self, eVision.Legacy.ELine a, eVision.Legacy.ELine AA, eVision.Legacy.ECircle r, eVision.Legacy.ECircle RR)
	Retrieves each edge of the eVision.Legacy.EWedgeShape.
None	Draw (self, eVision.EDrawAdapter\|None graphicContext, eVision.EDrawingMode drawingMode, bool daughters)
	Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.
None	Draw (self, eVision.EDrawAdapter\|None graphicContext, eVision.EDrawingMode drawingMode)
	Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.
None	Draw (self, eVision.EDrawAdapter\|None graphicContext)
	Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.
None	Closest (self)
	Find the daughter shape that is the closest to this shape.
bool	HitTest (self, bool bDaughters)
	Checks if there is a handle under the cursor.
bool	HitTest (self)
	Checks if there is a handle under the cursor.
None	Drag (self, int n32CursorX, int n32CursorY)
	Moves a handle to a new position and updates the position parameters of the shape.
eVision.EPoint	Center (self)
	Center point of the shape.
	Center (self, eVision.EPoint value)
	Center point of the shape.
float	CenterX (self)
	Abscissa of the origin point of the shape.
float	CenterY (self)
	Ordinate of the origin point of the shape.
float	Angle (self)
	Orientation of the shape.
	Angle (self, float value)
	Orientation of the shape.
float	Scale (self)
	Horizontal sensor resolution, in pixels per unit.
	Scale (self, float value)
	Horizontal sensor resolution, in pixels per unit.
eVision.EShapeType	Type (self)
	Shape type.
float	Amplitude (self)
	Angular amplitude of the eVision.Legacy.EWedgeShape.
	Amplitude (self, float value)
	Angular amplitude of the eVision.Legacy.EWedgeShape.
float	InnerDiameter (self)
	Inner diameter of the eVision.Legacy.EWedgeShape.
float	OuterDiameter (self)
	Outer diameter of the eVision.Legacy.EWedgeShape.
float	InnerRadius (self)
	Inner radius of the eVision.Legacy.EWedgeShape.
float	OuterRadius (self)
	Outer radius of the eVision.Legacy.EWedgeShape.
float	Breadth (self)
	Breadth of the eVision.Legacy.EWedgeShape.
float	InnerArcLength (self)
	Inner circle arc length of the eVision.Legacy.EWedgeShape.
float	OuterArcLength (self)
	Outer circle arc length of the eVision.Legacy.EWedgeShape.
float	OrgAngle (self)
	Angular position from where the eVision.Legacy.EWedgeShape extents.
float	ApexAngle (self)
	Angular position at the apex of the eVision.Legacy.EWedgeShape.
float	EndAngle (self)
	Ending angular position of the eVision.Legacy.EWedgeShape.
eVision.EPoint	InnerOrg (self)
	Inner origin point coordinates of the eVision.Legacy.EWedgeShape.
eVision.EPoint	InnerApex (self)
	Inner apex point coordinates of the eVision.Legacy.EWedgeShape.
eVision.EPoint	InnerEnd (self)
	Inner end point coordinates of the eVision.Legacy.EWedgeShape.
eVision.EPoint	OuterOrg (self)
	Outer origin point coordinates of the eVision.Legacy.EWedgeShape.
eVision.EPoint	OuterApex (self)
	Outer apex point coordinates of the eVision.Legacy.EWedgeShape.
eVision.EPoint	OuterEnd (self)
	Outer end point coordinates of the eVision.Legacy.EWedgeShape.
bool	FullBreadth (self)
	Flag indicating if the eVision.Legacy.EWedgeShape has a full breadth (breadth = radius).
bool	FullCircle (self)
	Flag indicating if the eVision.Legacy.EWedgeShape is a full circle (amplitude = 2 PI).
bool	Direct (self)
	Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.
	Direct (self, bool value)
	Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.
Public Member Functions inherited from eVision.Legacy.EShape
eVision.Legacy.EShape\|None	GetShapeNamed (self, str name)
	Returns a pointer to a daughter gauge or shape specified by its name.
bool	GetFound (self)
	Flag indicating whether a measured shape has been found.
bool	GetAutoArrange (self)
None	SetAutoArrange (self, bool bAutoArrange, bool bDaughters)
None	SetAutoArrange (self, bool bAutoArrange)
None	SetFound (self, bool bFound, bool bDaughters)
None	SetFound (self, bool bFound)
bool	GetInspected (self)
None	SetInspected (self, bool bFound, bool bDaughters)
None	SetInspected (self, bool bFound)
bool	GetPassed (self)
None	SetPassed (self, bool bFound, bool bDaughters)
None	SetPassed (self, bool bFound)
bool	GetQuickDraw (self)
None	SetQuickDraw (self, bool bFound, bool bDaughters)
None	SetQuickDraw (self, bool bFound)
bool	GetOptionalDraw (self)
None	SetOptionalDraw (self, bool bFound, bool bDaughters)
None	SetOptionalDraw (self, bool bFound)
bool	GetUserFlag (self)
None	SetUserFlag (self, bool bUserFlag, bool bDaughters)
None	SetUserFlag (self, bool bUserFlag)
bool	GetAllocated (self)
	Gets the allocated flag.
None	EnableBehaviorFilter (self, eVision.EShapeBehavior behavior, bool value)
	Modifies the so-called behavior filter that is a conjunction of conditions specifying when a shape or a gauge should be displayed or taken into consideration when monitoring the mouse interactions.
None	EnableBehaviorFilter (self, eVision.EShapeBehavior behavior)
	Modifies the so-called behavior filter that is a conjunction of conditions specifying when a shape or a gauge should be displayed or taken into consideration when monitoring the mouse interactions.
None	DisableBehaviorFilter (self, eVision.EShapeBehavior behavior)
	Disables (i.e.
None	Attach (self, eVision.Legacy.EShape\|None mother)
	Attaches the gauge to a mother gauge or shape.
None	Detach (self)
	Detaches the gauge from its mother gauge or shape.
None	DetachDaughters (self)
	Detaches the daughter gauges or shapes.
eVision.Legacy.EShape\|None	GetDaughter (self, int index)
	Returns a pointer to the specified daughter gauge or shape.
bool	IsWorld (self)
None	InvalidateWorld (self)
	Invalidates the world shape for this shape and all its ancestors.
eVision.EPoint	LocalToSensor (self, eVision.EPoint LPoint)
	Transforms a point from local coordinates to sensor coordinates.
eVision.EPoint	SensorToLocal (self, eVision.EPoint SPoint)
	Transforms a point from sensor coordinates to local coordinates.
None	SetZoom (self, float zoomX, float zoomY)
	Sets the horizontal and vertical zooming factors for drawing operations.
None	SetZoom (self, float zoomX)
	Sets the horizontal and vertical zooming factors for drawing operations.
None	SetZoom (self)
	Sets the horizontal and vertical zooming factors for drawing operations.
None	SetPan (self, float panX, float panY)
	Sets the horizontal and vertical panning values for drawing operations, expressed in pixels.
None	SetPan (self, float panX)
	Sets the horizontal and vertical panning values for drawing operations, expressed in pixels.
None	SetPan (self)
	Sets the horizontal and vertical panning values for drawing operations, expressed in pixels.
None	SetDraggingMode (self, eVision.EDraggingMode eDraggingMode, bool bDaughters)
	Sets the dragging mode which defines how the shape could be dragged.
None	SetDraggingMode (self, eVision.EDraggingMode eDraggingMode)
	Sets the dragging mode which defines how the shape could be dragged.
eVision.EDraggingMode	GetDraggingMode (self)
	Gets the dragging mode which defines how the shape could be dragged.
None	SetCursor (self, int x, int y)
	Sets the cursor current coordinates.
None	Process (self, eVision.EROIBW8\|None pSrc, bool bDaughters)
None	Process (self, eVision.EROIBW8\|None pSrc)
None	Process (self, eVision.EROIBW8\|None pSrc, eVision.ERegion region, bool bDaughters)
None	Process (self, eVision.EROIBW8\|None pSrc, eVision.ERegion region)
None	Save (self, str path, bool daughters)
	Loads a Shape.The given eVision.ESerializer must have been created for writing.
None	Save (self, str path)
	Loads a Shape.The given eVision.ESerializer must have been created for writing.
None	Save (self, eVision.ESerializer\|None serializer, bool daughters)
	Loads a Shape.The given eVision.ESerializer must have been created for writing.
None	Save (self, eVision.ESerializer\|None serializer)
	Loads a Shape.The given eVision.ESerializer must have been created for writing.
None	Load (self, str path, bool daughters)
	Loads a Shape.The given eVision.ESerializer must have been created for reading.
None	Load (self, str path)
	Loads a Shape.The given eVision.ESerializer must have been created for reading.
None	Load (self, eVision.ESerializer\|None serializer, bool daughters)
	Loads a Shape.The given eVision.ESerializer must have been created for reading.
None	Load (self, eVision.ESerializer\|None serializer)
	Loads a Shape.The given eVision.ESerializer must have been created for reading.
bool	HasProperty (self, str aProperty)
	Returns whether a eVision.Legacy.EShape has a property named aProperty.
str	GetProperty (self, str aProperty)
	Gets the value of property aProperty.
None	SetProperty (self, str aProperty, str aValue)
	Sets the value of property aProperty to aValue for this eVision.Legacy.EShape.
None	SetPropertyRecursive (self, str aProperty, str aValue)
	Sets the value of property aProperty to aValue for this eVision.Legacy.EShape and all of its daughters.
None	RemoveProperty (self, str aProperty)
	Removes the property name aProperty from the eVision.Legacy.EShape.
bool	HasValidPolarityProperty (self)
	Returns whether the eVision.Legacy.EShape has a valid polarity property.
None	EnableTypeFilter (self, int un32Types)
	Enables the filter of the specified shape type.
None	DisableTypeFilter (self)
	Enables all shape types.
str	Name (self)
	Name of the eVision.Legacy.EShape object.
	Name (self, str value)
	Name of the eVision.Legacy.EShape object.
bool	Visible (self)
	Flag indicating whether the shape is visible or not.
	Visible (self, bool value)
	Flag indicating whether the shape is visible or not.
bool	Selected (self)
	Flag indicating whether the shape is selected or not.
	Selected (self, bool value)
	Flag indicating whether the shape is selected or not.
bool	Selectable (self)
	Flag indicating whether the shape can be selected or not.
	Selectable (self, bool value)
	Flag indicating whether the shape can be selected or not.
bool	Dragable (self)
	Flag indicating whether the shape can be dragged or not.
	Dragable (self, bool value)
	Flag indicating whether the shape can be dragged or not.
bool	Resizable (self)
	Flag indicating whether the shape can be resized or not.
	Resizable (self, bool value)
	Flag indicating whether the shape can be resized or not.
bool	Rotatable (self)
	Flag indicating whether the shape can be rotated or not.
	Rotatable (self, bool value)
	Flag indicating whether the shape can be rotated or not.
bool	Labeled (self)
	Flag indicating whether the shape label should be displayed or not.
	Labeled (self, bool value)
	Flag indicating whether the shape label should be displayed or not.
bool	Active (self)
	Flag indicating whether the shape is active or not.
	Active (self, bool value)
	Flag indicating whether the shape is active or not.
bool	ActualShape (self)
	Flag indicating whether an inquiry returns a result pertaining to the nominal gauge (false, default) or the fitted model (true).
	ActualShape (self, bool value)
	Flag indicating whether an inquiry returns a result pertaining to the nominal gauge (false, default) or the fitted model (true).
int	NumDaughters (self)
	Number of daughters attached to the shape.
eVision.Legacy.EShape\|None	Mother (self)
	Pointer to the mother shape.
eVision.Legacy.EWorldShape\|None	WorldShape (self)
	World ancestor.
float	ZoomX (self)
	Current horizontal zooming factor for drawing operations.
float	ZoomY (self)
	Current vertical zooming factor for drawing operations.
float	PanX (self)
	Current horizontal panning value for drawing operations, expressed in pixels.
float	PanY (self)
	Current vertical panning value for drawing operations, expressed in pixels.
eVision.EDragHandle	HitHandle (self)
	Handle currently under the cursor.
eVision.Legacy.EShape\|None	HitShape (self)
	Pointer to the shape currently under the cursor.
eVision.Legacy.EShape\|None	ClosestShape (self)
	Closest shape among the daughters.

Protected Member Functions
	_Wedge__setter (self, eVision.Legacy.EWedge value)
	Sets the nominal position, length and rotation angle of the wedge according to a known eVision.Legacy.EWedge object.
Protected Member Functions inherited from eVision.Legacy.EShape
	_VisibleRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and its daughter shapes are visible or not.
	_SelectedRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters are selected or not.
	_SelectableRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters can be selected or not.
	_DragableRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters can be dragged or not.
	_ResizableRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters can be resized or not.
	_RotatableRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters can be rotated or not.
	_LabeledRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape label should be displayed or not.
	_ActiveRecursive__setter (self, bool value)
	Sets the flag indicating whether the shape and all its daughters are active or not.
	_ActualShapeRecursive__setter (self, bool value)
	Sets the flag indicating whether an inquiry returns a result pertaining to the nominal gauge (false, default) or the fitted model (true).

Properties
	Wedge
Properties inherited from eVision.Legacy.EShape
	VisibleRecursive
	SelectedRecursive
	SelectableRecursive
	DragableRecursive
	ResizableRecursive
	RotatableRecursive
	LabeledRecursive
	ActiveRecursive
	ActualShapeRecursive

Detailed Description

Manages a wedge shape.

Remarks:

License(s): BasicTypes

Member Function Documentation

◆ _Wedge__setter()

eVision.Legacy.EWedgeShape._Wedge__setter	(		self,
		eVision.Legacy.EWedge	value )

protected

Sets the nominal position, length and rotation angle of the wedge according to a known eVision.Legacy.EWedge object.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ Amplitude() [1/2]

float eVision.Legacy.EWedgeShape.Amplitude ( self )

Angular amplitude of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ Amplitude() [2/2]

eVision.Legacy.EWedgeShape.Amplitude	(		self,
		float	value )

Angular amplitude of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ Angle() [1/2]

float eVision.Legacy.EWedgeShape.Angle ( self )

Orientation of the shape.

◆ Angle() [2/2]

eVision.Legacy.EWedgeShape.Angle	(		self,
		float	value )

Orientation of the shape.

◆ ApexAngle()

float eVision.Legacy.EWedgeShape.ApexAngle ( self )

Angular position at the apex of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ Breadth()

float eVision.Legacy.EWedgeShape.Breadth ( self )

Breadth of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ Center() [1/2]

eVision.EPoint eVision.Legacy.EWedgeShape.Center ( self )

Center point of the shape.

◆ Center() [2/2]

eVision.Legacy.EWedgeShape.Center	(		self,
		eVision.EPoint	value )

Center point of the shape.

◆ CenterX()

float eVision.Legacy.EWedgeShape.CenterX ( self )

Abscissa of the origin point of the shape.

◆ CenterY()

float eVision.Legacy.EWedgeShape.CenterY ( self )

Ordinate of the origin point of the shape.

◆ Closest()

None eVision.Legacy.EWedgeShape.Closest ( self )

Find the daughter shape that is the closest to this shape.

To retrieve the closest shape, use eVision.Legacy.EShape.ClosestShape.

Reimplemented from eVision.Legacy.EShape.

◆ CopyTo() [1/2]

None eVision.Legacy.EWedgeShape.CopyTo	(		self,
		eVision.Legacy.EWedgeShape	dest )

Copies all the data of the current eVision.Legacy.EWedgeShape object into another eVision.Legacy.EWedgeShape object and returns it.

Remarks:

In the overload taking a pointer, in case of a NULL pointer, a new eVision.Legacy.EWedgeShape object will be created and returned.

Parameters

dest	Pointer to the eVision.Legacy.EWedgeShape object in which the current eVision.Legacy.EWedgeShape object data have to be copied.

Reimplemented in eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ CopyTo() [2/2]

None eVision.Legacy.EWedgeShape.CopyTo	(		self,
		eVision.Legacy.EWedgeShape	dest,
		bool	bRecursive )

Copies all the data of the current eVision.Legacy.EWedgeShape object into another eVision.Legacy.EWedgeShape object and returns it.

Remarks:

In the overload taking a pointer, in case of a NULL pointer, a new eVision.Legacy.EWedgeShape object will be created and returned.

Parameters

dest	Pointer to the eVision.Legacy.EWedgeShape object in which the current eVision.Legacy.EWedgeShape object data have to be copied.
bRecursive	true if the children shapes have to be copied as well, false otherwise.

Reimplemented in eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ Direct() [1/2]

bool eVision.Legacy.EWedgeShape.Direct ( self )

Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.

Remarks:

true (default) means that angles increase anticlockwisely in a direct coordinate system, and clockwisely in an inverse coordinate system.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards.
When the field of view is not calibrated, the coordinate system is said to be inverse the abscissa extends rightwards and the ordinate extends downwards.

◆ Direct() [2/2]

eVision.Legacy.EWedgeShape.Direct	(		self,
		bool	value )

Flag indicating whether positive angles correspond to a clockwise or an anticlockwise rotation.

Remarks:

true (default) means that angles increase anticlockwisely in a direct coordinate system, and clockwisely in an inverse coordinate system.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards.
When the field of view is not calibrated, the coordinate system is said to be inverse the abscissa extends rightwards and the ordinate extends downwards.

◆ Drag()

None eVision.Legacy.EWedgeShape.Drag	(		self,
		int	n32CursorX,
		int	n32CursorY )

Moves a handle to a new position and updates the position parameters of the shape.

Parameters

n32CursorX	Current cursor coordinates.
n32CursorY	Current cursor coordinates.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ Draw() [1/3]

None eVision.Legacy.EWedgeShape.Draw	(		self,
		eVision.EDrawAdapter \| None	graphicContext )

Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.

Parameters

graphicContext Handle of the device context on which to draw.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ Draw() [2/3]

None eVision.Legacy.EWedgeShape.Draw	(		self,
		eVision.EDrawAdapter \| None	graphicContext,
		eVision.EDrawingMode	drawingMode )

Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.

Parameters

graphicContext	Handle of the device context on which to draw.
drawingMode	Indicates how the point location or model fitting gauge must be displayed, as defined by eVision.EDrawingMode.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ Draw() [3/3]

None eVision.Legacy.EWedgeShape.Draw	(		self,
		eVision.EDrawAdapter \| None	graphicContext,
		eVision.EDrawingMode	drawingMode,
		bool	daughters )

Draws a graphical representation of a shape, as defined by eVision.EDrawingMode.

Parameters

graphicContext	Handle of the device context on which to draw.
drawingMode	Indicates how the point location or model fitting gauge must be displayed, as defined by eVision.EDrawingMode.
daughters	true if the daughters gauges are to be displayed also.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ EndAngle()

float eVision.Legacy.EWedgeShape.EndAngle ( self )

Ending angular position of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ FullBreadth()

bool eVision.Legacy.EWedgeShape.FullBreadth ( self )

Flag indicating if the eVision.Legacy.EWedgeShape has a full breadth (breadth = radius).

◆ FullCircle()

bool eVision.Legacy.EWedgeShape.FullCircle ( self )

Flag indicating if the eVision.Legacy.EWedgeShape is a full circle (amplitude = 2 PI).

◆ GetCorners()

None eVision.Legacy.EWedgeShape.GetCorners	(		self,
		eVision.EPoint	ar,
		eVision.EPoint	AAr,
		eVision.EPoint	aRR,
		eVision.EPoint	AARR )

Retrieves the coordinates of each corner of the eVision.Legacy.EWedgeShape.

Parameters

ar	Coordinates of the inner org corner of the eVision.Legacy.EWedgeShape.
AAr	Coordinates of the inner end corner of the eVision.Legacy.EWedgeShape.
aRR	Coordinates of the outer org corner of the eVision.Legacy.EWedgeShape.
AARR	Coordinates of the outer end corner of the eVision.Legacy.EWedgeShape.

◆ GetEdges()

None eVision.Legacy.EWedgeShape.GetEdges	(		self,
		eVision.Legacy.ELine	a,
		eVision.Legacy.ELine	AA,
		eVision.Legacy.ECircle	r,
		eVision.Legacy.ECircle	RR )

Retrieves each edge of the eVision.Legacy.EWedgeShape.

Parameters

a	Org edge of the eVision.Legacy.EWedgeShape.
AA	End edge of the eVision.Legacy.EWedgeShape.
r	Inner edge of the eVision.Legacy.EWedgeShape.
RR	Outer edge of the eVision.Legacy.EWedgeShape.

◆ GetInnerPoint()

eVision.EPoint eVision.Legacy.EWedgeShape.GetInnerPoint	(		self,
		float	fraction )

Returns the coordinates of a particular point specified by its location along the inner circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetMidEdges()

None eVision.Legacy.EWedgeShape.GetMidEdges	(		self,
		eVision.EPoint	a,
		eVision.EPoint	AA,
		eVision.EPoint	r,
		eVision.EPoint	RR )

Retrieves the center coordinates of each edge of the wedge fitting gauge.

Parameters

a	Center coordinates of the org edge of the eVision.Legacy.EWedgeShape.
AA	Center coordinates of the end edge of the eVision.Legacy.EWedgeShape.
r	Center coordinates of the inner edge of the eVision.Legacy.EWedgeShape.
RR	Center coordinates of the outer edge of the eVision.Legacy.EWedgeShape.

◆ GetOuterPoint()

eVision.EPoint eVision.Legacy.EWedgeShape.GetOuterPoint	(		self,
		float	fraction )

Returns the coordinates of a particular point specified by its location along the outter circle arc.

Parameters

fraction Point location expressed as a fraction of the circle arc (range [-1, +1]).

◆ GetPoint()

eVision.EPoint eVision.Legacy.EWedgeShape.GetPoint	(		self,
		float	breadthFraction,
		float	angleFraction )

Returns the coordinates of a particular point specified by its location along the wedge perimeter.

Parameters

breadthFraction	Point location expressed as a fraction of the wedge breadth (range -1, +1).
angleFraction	Point location expressed as a fraction of the wedge amplitude (range -1, +1).

◆ HitTest() [1/2]

bool eVision.Legacy.EWedgeShape.HitTest ( self )

Checks if there is a handle under the cursor.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ HitTest() [2/2]

bool eVision.Legacy.EWedgeShape.HitTest	(		self,
		bool	bDaughters )

Checks if there is a handle under the cursor.

Parameters

bDaughters Indicates if the check must be done in the whole hierarchy or just this object.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ InnerApex()

eVision.EPoint eVision.Legacy.EWedgeShape.InnerApex ( self )

Inner apex point coordinates of the eVision.Legacy.EWedgeShape.

◆ InnerArcLength()

float eVision.Legacy.EWedgeShape.InnerArcLength ( self )

Inner circle arc length of the eVision.Legacy.EWedgeShape.

◆ InnerDiameter()

float eVision.Legacy.EWedgeShape.InnerDiameter ( self )

Inner diameter of the eVision.Legacy.EWedgeShape.

◆ InnerEnd()

eVision.EPoint eVision.Legacy.EWedgeShape.InnerEnd ( self )

Inner end point coordinates of the eVision.Legacy.EWedgeShape.

◆ InnerOrg()

eVision.EPoint eVision.Legacy.EWedgeShape.InnerOrg ( self )

Inner origin point coordinates of the eVision.Legacy.EWedgeShape.

◆ InnerRadius()

float eVision.Legacy.EWedgeShape.InnerRadius ( self )

Inner radius of the eVision.Legacy.EWedgeShape.

◆ OrgAngle()

float eVision.Legacy.EWedgeShape.OrgAngle ( self )

Angular position from where the eVision.Legacy.EWedgeShape extents.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

The sign of the rotation angle depends whether the field of view is calibrated or not.

When the field of view is calibrated, the coordinate system is said to be direct, the abscissa extends rightwards and the ordinate extends upwards. In this case, an anticlockwise rotation leads to a positive angle value.
When the field of view is not calibrated, the coordinate system is said to be inverse, the abscissa extends rightwards and the ordinate extends downwards. In this case, a clockwise rotation leads to a positive angle value.

◆ OuterApex()

eVision.EPoint eVision.Legacy.EWedgeShape.OuterApex ( self )

Outer apex point coordinates of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterArcLength()

float eVision.Legacy.EWedgeShape.OuterArcLength ( self )

Outer circle arc length of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterDiameter()

float eVision.Legacy.EWedgeShape.OuterDiameter ( self )

Outer diameter of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterEnd()

eVision.EPoint eVision.Legacy.EWedgeShape.OuterEnd ( self )

Outer end point coordinates of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterOrg()

eVision.EPoint eVision.Legacy.EWedgeShape.OuterOrg ( self )

Outer origin point coordinates of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal outer radius (diameter), its breadth (must be negative), the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ OuterRadius()

float eVision.Legacy.EWedgeShape.OuterRadius ( self )

Outer radius of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (its center coordinates), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude, and its outline tolerance.

◆ Scale() [1/2]

float eVision.Legacy.EWedgeShape.Scale ( self )

Horizontal sensor resolution, in pixels per unit.

◆ Scale() [2/2]

eVision.Legacy.EWedgeShape.Scale	(		self,
		float	value )

Horizontal sensor resolution, in pixels per unit.

◆ SetCenterXY()

None eVision.Legacy.EWedgeShape.SetCenterXY	(		self,
		float	centerX,
		float	centerY )

Sets the center coordinates of a eVision.Legacy.EWedgeShape object.

Parameters

centerX	Center coordinates of the eVision.Legacy.EWedgeShape object.
centerY	Center coordinates of the eVision.Legacy.EWedgeShape object.

◆ SetDiameters() [1/2]

None eVision.Legacy.EWedgeShape.SetDiameters	(		self,
		float	diameter )

Sets the nominal inner/outer diameter and breadth of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.Legacy.EWedgeShape diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

Parameters

diameter Outer diameter of the eVision.Legacy.EWedgeShape. The default value is 100.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ SetDiameters() [2/2]

None eVision.Legacy.EWedgeShape.SetDiameters	(		self,
		float	diameter,
		float	breadth )

Sets the nominal inner/outer diameter and breadth of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (given by the coordinates of its center), its nominal outer radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.Legacy.EWedgeShape diameter value is 100, which means 100 pixels when the field of view is not calibrated and 100 "units" in case of a calibrated field of view.

Parameters

diameter	Outer diameter of the eVision.Legacy.EWedgeShape. The default value is 100.
breadth	Breadth of the eVision.Legacy.EWedgeShape. It must be negative or zero. Its default value is -50.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ SetFromCenterAndOrigin() [1/3]

None eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

◆ SetFromCenterAndOrigin() [2/3]

None eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

◆ SetFromCenterAndOrigin() [3/3]

None eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth,
		bool	direct )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

◆ SetFromOriginMiddleEnd() [1/3]

None eVision.Legacy.EWedgeShape.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetFromOriginMiddleEnd() [2/3]

None eVision.Legacy.EWedgeShape.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetFromOriginMiddleEnd() [3/3]

None eVision.Legacy.EWedgeShape.SetFromOriginMiddleEnd	(		self,
		eVision.EPoint	origin,
		eVision.EPoint	middle,
		eVision.EPoint	end,
		float	breadth,
		bool	fullCircle )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Parameters

origin	Origin point coordinates of the wedge.
middle	Middle point coordinates of the wedge.
end	End point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
fullCircle	true (default) in case of a full turn wedge. If fullCircle is false, origin and end give the wedge's amplitude.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetFromTwoPoints() [1/3]

None eVision.Legacy.EWedgeShape.SetFromTwoPoints	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin instead.

Deprecated in version 23.12. Scheduled to be removed in version 27.6.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetFromTwoPoints() [2/3]

None eVision.Legacy.EWedgeShape.SetFromTwoPoints	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin instead.

Deprecated in version 23.12. Scheduled to be removed in version 27.6.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetFromTwoPoints() [3/3]

None eVision.Legacy.EWedgeShape.SetFromTwoPoints	(		self,
		eVision.EPoint	center,
		eVision.EPoint	origin,
		float	breadth,
		bool	direct )

Sets the geometric parameters (nominal position and diameter, breadth, angular position and amplitude) of an eVision.Legacy.EWedgeShape object.

Remarks:

In a direct coordinate system, the abscissa extends rightwards and the ordinate extends upwards. The coordinate system is said to be inverse if the abscissa extends rightwards and the ordinate extends downwards.

Deprecated

Use eVision.Legacy.EWedgeShape.SetFromCenterAndOrigin instead.

Deprecated in version 23.12. Scheduled to be removed in version 27.6.

Parameters

center	Center coordinates of the wedge at its nominal position. The default value is (0,0).
origin	Origin point coordinates of the wedge.
breadth	Nominal breadth of the wedge. It must be negative or zero. The default value is -50.
direct	true (default) means that angles increase anticlockwise in a direct coordinate system and clockwise in an inverse coordinate system.

Reimplemented in eVision.Legacy.EWedgeGauge, eVision.Legacy.EWedgeGauge, and eVision.Legacy.EWedgeGauge.

◆ SetRadii() [1/2]

None eVision.Legacy.EWedgeShape.SetRadii	(		self,
		float	outerRadius )

Sets the nominal radius and breadth of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.Legacy.EWedgeShape radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

Parameters

outerRadius Outer radius of the eVision.Legacy.EWedgeShape. The default value is 50.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ SetRadii() [2/2]

None eVision.Legacy.EWedgeShape.SetRadii	(		self,
		float	outerRadius,
		float	breadth )

Sets the nominal radius and breadth of the eVision.Legacy.EWedgeShape.

Remarks:

A eVision.Legacy.EWedgeShape is fully defined knowing its nominal position (given by the coordinates of its center), its nominal radius (diameter), its breadth, the angular position from where it extents, its angular amplitude and its outline tolerance.

By default, the eVision.Legacy.EWedgeShape radius value is 50, which means 50 pixels when the field of view is not calibrated and 50 "units" in case of a calibrated field of view.

Parameters

outerRadius	Outer radius of the eVision.Legacy.EWedgeShape. The default value is 50.
breadth	Breadth of the eVision.Legacy.EWedgeShape, which must be negative or zero. Its default value is -50.

Reimplemented in eVision.Legacy.EWedgeGauge.

◆ Type()

eVision.EShapeType eVision.Legacy.EWedgeShape.Type ( self )

Shape type.

Reimplemented from eVision.Legacy.EShape.

Reimplemented in eVision.Legacy.EWedgeGauge.

Property Documentation

◆ Wedge

eVision.Legacy.EWedgeShape.Wedge

static

Initial value:

=  property(None, _Wedge__setter, None,
        
    )

Public Member Functions

Protected Member Functions

Properties

Detailed Description

Member Function Documentation

◆ _Wedge__setter()

◆ Amplitude() [1/2]

◆ Amplitude() [2/2]

◆ Angle() [1/2]

◆ Angle() [2/2]

◆ ApexAngle()

◆ Breadth()

◆ Center() [1/2]

◆ Center() [2/2]

◆ CenterX()

◆ CenterY()

◆ Closest()

◆ CopyTo() [1/2]

◆ CopyTo() [2/2]

◆ Direct() [1/2]

◆ Direct() [2/2]

◆ Drag()

◆ Draw() [1/3]

◆ Draw() [2/3]

◆ Draw() [3/3]

◆ EndAngle()

◆ FullBreadth()

◆ FullCircle()

◆ GetCorners()

◆ GetEdges()

◆ GetInnerPoint()

◆ GetMidEdges()

◆ GetOuterPoint()

◆ GetPoint()

◆ HitTest() [1/2]

◆ HitTest() [2/2]

◆ InnerApex()

◆ InnerArcLength()

◆ InnerDiameter()

◆ InnerEnd()

◆ InnerOrg()

◆ InnerRadius()

◆ OrgAngle()

◆ OuterApex()

◆ OuterArcLength()

◆ OuterDiameter()

◆ OuterEnd()

◆ OuterOrg()

◆ OuterRadius()

◆ Scale() [1/2]

◆ Scale() [2/2]

◆ SetCenterXY()

◆ SetDiameters() [1/2]

◆ SetDiameters() [2/2]

◆ SetFromCenterAndOrigin() [1/3]

◆ SetFromCenterAndOrigin() [2/3]

◆ SetFromCenterAndOrigin() [3/3]

◆ SetFromOriginMiddleEnd() [1/3]

◆ SetFromOriginMiddleEnd() [2/3]

◆ SetFromOriginMiddleEnd() [3/3]

◆ SetFromTwoPoints() [1/3]

◆ SetFromTwoPoints() [2/3]

◆ SetFromTwoPoints() [3/3]

◆ SetRadii() [1/2]

◆ SetRadii() [2/2]

◆ Type()

Property Documentation

◆ Wedge