|
| class | E3DAttribute |
| | This enumeration contains the possible attributes of the eVision.Easy3D.EPointCloud in addition to the eVision.Easy3D.E3DPoint. More...
|
| class | E3DObjectFeature |
| | The list of possible extracted features for eVision.Easy3D.E3DObject. More...
|
| class | E3DPlaneNormalOrientation |
| | Orient the normal of the plane such that normal.X/Y/Z is positive/negative. More...
|
| class | EAlignmentPolarity |
| | Polarity of an alignment, used in eVision.Easy3D.EFeaturesAligner. More...
|
| class | EAlignmentType |
| | Type of alignment to perform by eVision.Easy3D.EFeaturesAligner. More...
|
| class | EAttributeType |
| | This enumeration contains the possible types for the eVision.Easy3D.E3DAttribute. More...
|
| class | EAxisOriginMode |
| | This enumeration contains the possible values for the parameter of eVision.Easy3D.E3DViewer.AxisOrigin method. More...
|
| class | EAxisSystemType |
| | Axis type used in a eVision.Easy3D.EZMap or eVision.Easy3D.EDepthMap. More...
|
| class | ECalibrationType |
| | The Easy3D calibration type. More...
|
| class | EColorRampMode |
| | This enumeration contains the possible values for the parameter of eVision.Easy3D.E3DViewer.GenerateColors method. More...
|
| class | EComparisonDistanceMode |
| | This enumeration specifies the distance mode for the 3D comparison. More...
|
| class | EFillUndefinedPixelsDirection |
| | Direction in which the undefined pixels are filled in a depthmap. More...
|
| class | EFillUndefinedPixelsMethod |
| | Method to fill the undefined pixels in a depthmap. More...
|
| class | EMapConversionMode |
| | Conversion modes to use in eVision.Easy3D.EConverter. More...
|
| class | EMaximumAnalysisMode |
| | This enumeration contains the possible values for the analysis mode of the eVision.Easy3D.ELaserLineExtractor object. More...
|
| class | ENoiseRemovalMethod |
| | Type of filter used in method eVision.Easy3D.EFilters.RemoveNoise. More...
|
| class | EObjectBasedCalibrationPrecisionVsSpeedTradeOff |
| | The precision vs speed trade-off. More...
|
| class | EObjectBasedCalibrationType |
| | The type of the calibration object. More...
|
| class | EPhotometricStereoContrast |
| | This enumeration contains the possible ways to handle the contrast when retrieving Albedos, Gaussian curvatures or Mean curvatures. More...
|
| class | EPlaneCropperType |
| | Type of crop to use in eVision.Easy3D.EPlaneCropper. More...
|
| class | EPointCloudFilteringMethod |
| | Type of filtering method to use in eVision.Easy3D.EPointCloudFilter. More...
|
| class | EPreservationMode |
| | Enum defining what quantities related to the X, Y and Z axes are preserved by eVision.Easy3D.EZMapLeveler. More...
|
| class | EProjectionType |
| | This enumeration contains the possible values for the parameter of eVision.Easy3D.E3DViewer.ProjectionType method. More...
|
| class | ESourceColorMode |
| | This enumeration contains the modes for the display of the point cloud colors. More...
|
| class | ETextLabelAlignment |
| | This enumeration contains the alignment of the text labels. More...
|
| class | EUIAPI |
| | This enumeration contains the various User Interface API supported by eVision.Easy3D.E3DViewer. More...
|
| class | EViewDirection |
| | This enumeration contains the axis aligned view directions. More...
|
| class | EZMapGeneratorResolutionXYMode |
| | Mode used to specify the resolution of the ZMap generated on the x and y axes. More...
|
| class | EZMapGeneratorZResolutionFailureHandler |
| | Mode used to specify what to do when the Z Resolution set is too small to represent all the data. More...
|
| class | EZMapImageToWorldKernel |
| | Represents the kernel to use to compute the Z coordinate of the worldPoint in eVision.Easy3D.EZMap.ImageToWorld. More...
|
| class | EZMapOrientationVectorMode |
| | The eVision.Easy3D.EZMap orientation, it's the direction of the X (width) axis of the ZMap. More...
|
| class | EZMapReferencePlaneMode |
| | The 3D reference plane used to build the eVision.Easy3D.EZMap. More...
|
| class | E3DAligner |
| | Aligns an eVision.Easy3D.EPointCloud or eVision.Easy3D.EZMap on a reference eVision.Easy3D.EMesh, eVision.Easy3D.EPointCloud or eVision.Easy3D.EZMap. More...
|
| class | E3DAlignment |
| | Represents a 3D Alignment returned by eVision.Easy3D.E3DAligner. More...
|
| class | E3DAnomaly |
| | Represents a detected 3D anomaly. More...
|
| class | E3DAxisDisplay |
| | Represents the axis and the grid to display in the eVision.Easy3D.E3DViewer. More...
|
| class | E3DAxisSystem |
| | Represent a 3D base axis system. More...
|
| class | E3DBox |
| | A 3D box, used as bounding volume for eVision.Easy3D.E3DObject class. More...
|
| class | E3DComparer |
| | Represents a 3D comparison context. More...
|
| class | E3DLine |
| | Represents a 3D line. More...
|
| class | E3DMatch |
| | Represents a 3D match returned by eVision.Easy3D.E3DMatcher. More...
|
| class | E3DMatcher |
| | Aligns an eVision.Easy3D.EPointCloud or eVision.Easy3D.EZMap on and compares it with a reference eVision.Easy3D.EMesh, eVision.Easy3D.EPointCloud or eVision.Easy3D.EZMap. More...
|
| class | E3DObject |
| | A eVision.Easy3D.E3DObject is a geometric description of a set of 3D points, produced by E3DObjectExtractor. More...
|
| | eVision.Easy3D.E3DObjectExtractor is used to extract 3D objects from a ZMap. More...
|
| class | E3DOrthonormalAxisSystem |
| | E3DOrthonormalAxisSystem is a subassembly of eVision.Easy3D.E3DAxisSystem with properties Orthogonal and Normed. More...
|
| class | E3DPlane |
| | Represents a 3D plane. More...
|
| class | E3DRightOrthonormalAxisSystem |
| | E3DRightOrthonormalAxisSystem is a subassembly of eVision.Easy3D.E3DAxisSystem with properties Orthogonal and Normed and Right. More...
|
| class | E3DSphere |
| | Represents a 3D sphere. More...
|
| class | E3DTransformMatrix |
| | Represents a 3D transformation [4x4] matrix. More...
|
| class | E3DViewer |
| | Manages a viewer window for eVision.Easy3D.EPointCloud. More...
|
| class | EAffineTransformer |
| | Manages a 3D coordinates transformation context. More...
|
| class | ECalibrationGenerator |
| | Represents a 3D calibration model generator, a class made to compute calibration models. More...
|
| class | ECalibrationModel |
| | Represents a 3D calibration model. More...
|
| class | EConverter |
| | Conversion functions between bit depth formats of various 3D classes. More...
|
| class | EDecimator |
| | Decimation of a point cloud/ZMap/DepthMap. More...
|
| class | EDepthMap |
| | Represents a generic DepthMap type interface. More...
|
| class | EDepthMap16 |
| | Represents a eVision.Easy3D.EDepthMap with an 16-bit pixel internal representation. More...
|
| class | EDepthMap32f |
| | Represents a eVision.Easy3D.EDepthMap with an 32-bit pixel internal representation. More...
|
| class | EDepthMap8 |
| | Represents a eVision.Easy3D.EDepthMap with an internal 8-bit pixel representation. More...
|
| class | EDepthMapToMeshConverter |
| | Performs the conversion from a eVision.Easy3D.EDepthMap to a eVision.Easy3D.EMesh, using the given calibration model. More...
|
| class | EDepthMapToPointCloudConverter |
| | Performs the conversion from a eVision.Easy3D.EDepthMap to a eVision.Easy3D.EPointCloud, using the given calibration model. More...
|
| class | EErrorStatistics |
| | This object contains the error statistics (deviation between model and aligned points). More...
|
| class | EExplicitGeometricCalibrationModel |
| | eVision.Easy3D.EExplicitGeometricCalibrationModel is used to calibrate a depth map from a minimal set of explicit geometric values. More...
|
| class | EFeaturesAligner |
| | Alignment class, used to calculate the best transformation between matching pairs of points. More...
|
| class | EFilters |
| | Filtering functions used to remove noise on 3D containers. More...
|
| class | EGridDecimator |
| | Decimation of an eVision.Easy3D.EPointCloud. More...
|
| | Manages a laser line extraction context. More...
|
| class | EMesh |
| | Represents a 3D meshed object. More...
|
| class | EMeshToZMapConverter |
| | Computes an eVision.Easy3D.EZMap from an eVision.Easy3D.EMesh. More...
|
| class | EObjectBasedCalibrationGenerator |
| | Represents an object-based 3D calibration generator. More...
|
| class | EObjectBasedCalibrationModel |
| | eVision.Easy3D.EObjectBasedCalibrationModel is an Easy3D calibration model built from a scan of a reference object. More...
|
| class | EPhotometricStereoImager |
| | Manages photometric stereo reconstruction. More...
|
| class | EPlaneCropper |
| | A eVision.Easy3D.EPlaneCropper object is used to crop some points of a eVision.Easy3D.EPointCloud object. More...
|
| class | EPlaneFinder |
| | A eVision.Easy3D.EPlaneFinder object is used to search an eVision.Easy3D.E3DPlane in an eVision.Easy3D.EPointCloud. More...
|
| class | EPlaneFitter |
| | A eVision.Easy3D.EPlaneFitter object is used to fit an eVision.Easy3D.E3DPlane on an eVision.Easy3D.EPointCloud. More...
|
| class | EPointCloud |
| | Represents a 3D point cloud. More...
|
| class | EPointCloudFactory |
| | Manages a context for creating point clouds of specific shapes. More...
|
| class | EPointCloudFilter |
| | An eVision.Easy3D.EPointCloudFilter is used to filter some points out of an eVision.Easy3D.EPointCloud. More...
|
| class | EPointCloudMerger |
| | Merges several eVision.Easy3D.EPointCloud of the same scene from different sensors after having performed a calibration. More...
|
| class | EPointCloudStatistics |
| | Manages a context for retrieving statistics on an eVision.Easy3D.EPointCloud. More...
|
| class | EPointCloudToMeshConverter |
| | Performs the conversion from an eVision.Easy3D.EPointCloud to an eVision.Easy3D.EMesh. More...
|
| class | EPointCloudToZMapConverter |
| | Computes an eVision.Easy3D.EZMap from an eVision.Easy3D.EPointCloud. More...
|
| | A eVision.Easy3D.EPrincipalAxisExtractor object computes the principal axis analysis (PCA) on an eVision.Easy3D.EPointCloud and produces a eVision.Easy3D.E3DTransformMatrix as a result. More...
|
| class | ERandomDecimator |
| | Decimation of an eVision.Easy3D.EPointCloud. More...
|
| class | ERectangularCropper |
| | Manages a point cloud cropper in the shape of a rectangular parallelepiped. More...
|
| class | EScaleCalibrationModel |
| | eVision.Easy3D.EScaleCalibrationModel is used to convert depth map 2.5D point to 3D world position, only by applying a scale factor. More...
|
| class | ESimpleCropper |
| | Manages a point cloud cropper based on X/Y/Z value ranges. More...
|
| class | ESphereFitter |
| | A eVision.Easy3D.ESphereFitter object is used to fit an eVision.Easy3D.E3DSphere on an eVision.Easy3D.EPointCloud. More...
|
| class | ESphericalCropper |
| | Manages a spherical point cloud cropper. More...
|
| class | EStatistics |
| | Calculates various statistics on the pixels values of an eVision.Easy3D.EDepthMap or eVision.Easy3D.EZMap. More...
|
| class | EUtils |
| | 3D Utilitarian Functions. More...
|
| class | EZMap |
| | Represents a generic ZMap type interface. More...
|
| class | EZMap16 |
| | A ZMap16 is a 16bits corrected 2.5D image. More...
|
| class | EZMap32f |
| | A ZMap32f is a 32bits corrected 2.5D image. More...
|
| class | EZMap8 |
| | A ZMap8 is a 8bits corrected 2.5D image. More...
|
| class | EZMapLeveler |
| | Class performing the leveling of an eVision.Easy3D.EZMap. More...
|
| class | EZMapToMeshConverter |
| | Performs the conversion from an eVision.Easy3D.EZMap to an eVision.Easy3D.EMesh. More...
|
| class | EZMapToPointCloudConverter |
| | Generates an eVision.Easy3D.EPointCloud from a ZMap. More...
|
| class | TextLabel |
| | A class representing a text label that can be displayed using eVision.Easy3D.E3DViewer. More...
|
| class | E3DClosestPoint |
| | Struct containing the eVision.Easy3D.E3DPoint of an eVision.Easy3D.EPointCloud that is closest to a line or segment with its index in the cloud and its distance to the line or segment. More...
|
| class | E3DPoint |
| | Represents a 3D point with floating point coordinates. More...
|
| class | EAnomalyThresholds |
| | Thresholds used to define an anomaly in Easy3DMatch. More...
|
| class | EAzimuthElevationAngles |
| | Azimuth and Elevation Angles. More...
|
| class | EEdgeCroppingParameters |
| | Parameters used to defined edge cropping in Easy3DMatch. More...
|
| class | ERenderStyle |
| | Represents how to visualize 3D Objects in a E3DViewer. More...
|
| class | EStatistics16 |
| | Statistics on the pixels values of an eVision.Easy3D.EDepthMap16 or eVision.Easy3D.EZMap16 computed by eVision.Easy3D.EStatistics. More...
|
| class | EStatistics32f |
| | Statistics on the pixels values of an eVision.Easy3D.EDepthMap or eVision.Easy3D.EZMap computed by eVision.Easy3D.EStatistics. More...
|
| class | EStatistics8 |
| | Statistics on the pixels values of an eVision.Easy3D.EDepthMap8 or eVision.Easy3D.EZMap8 computed by eVision.Easy3D.EStatistics. More...
|
1.17.0